We hope to provide you with some information on the Smart - UPS 2000
DataSure Services is an American Power Conversion Authorized Service Centre.
Full sine wave output
All the protection of Smart-UPS v/s plus..
SmartSlots for SNMP manageability means wide-area reliability and uptime.
Rackmountable and Extended Runtime configurations available.
UPS Interface Expander card for multiple OS unattended, graceful shutdown. Provides two additional ports to facilitate safe system shutdown of up to three different operating system servers from one UPS
Remote UPS Management Device: Remotely manage your UPS via modem. Get complete UPS information, automatic pager calls on power power problems,and remote safe reboot of servers via user supplied modem.
PowerNet SNMP Adapter - 10 Base-T card makes your UPS "SNMP" manageable from your NMS. Server connections are also maintained for local management.
Recommended for Advanced Business Networks.
Capacity 2000 VA , 1500W
The Smart-UPS series feature offers software configurable features that allow users to "customize" the operation of a Smart-UPS to their environment and needs. Through software such as Power Doctor or PowerChute plus as well as the SNMP Adapter users may change the factory default settings and store these changes in Smart-UPS's permanent memory (EEPROM). The following parameters are adjustable:
User may assign any 8 character string to assist in UPS identification. For example, UPS ID may be server name or UPS location
Low transfer voltage may be moved downward to extend brownout range, or upward to protect sensitive equipment.
High transfer voltage may be moved lower to protect sensitive equipment, or higher to to conserve battery during extended high line conditions.
Sensitivity to line noise may be adjusted for fuel powered AC generator applications.
Smart - UPS now automatically performs self test every two weeks. This ensures a weakening battery will be detected prior to total failure. Users can opt for weekly testing, testing at start-up only, or no automatic self test.
The audible alarm may be supressed or delayed to eliminate nuisance alarms.
The low battery warning may be moved from 2 minutes up tp 10 minutes before battery exhaustion. This allows plenty of time to safely shut down Unix and other complex applications.
When utility line returns after a shutdown, Smart - Ups can insure the batteries first recharge to allow for susequent safe shutdown of file servers and CPUs. For telecom or hub applications, Smart - UPS can be set to reboot immediately.
The delay between when the "shutdown signal" is sent from the CPU to UPS and when the UPS "shuts down" can be adjusted for special occasions.
Allows multiple Smart-UPSs on the same power grid or circuit to stagger/sequence their return from Shutdown once the utility line returns.
For 230 Volt Models only.On-battery output voltage may be adjusted between 225 and 240 volts to match local voltage.
18.0 X 6.9 X 17.8 inches
45.7 X 17.5 X 45.2 cm
39 + 61 lbs. Net, 44 + 66 lbs. Shipping
17.7 + 27.7 kg Net, 20.0 + 29.9 kg Shipping
System Load(VA) Minutes Runtime Compaq SytemPro server 500 55 DECstation 5000 600 40 Two IBM PS/2 80 file servers 700 35 IBM AS/400 mini 800 29 DEC MicroVax 900 25 SynOptics Lattis Net 3000 1200 17 Four SystemPro servers 2000 8
Two year Warranty, with up to $50,000.00 Lifetime Protected Equipment Protection.
Thanks for visiting DataSure's APC Pages. As the pages are developed further we hope to provide more, so please bear with us during the ongoing development process.
For more information on DataSure Services's products and services, please send e-mail to firstname.lastname@example.org phone us at ( 604) 598-6831, 1-800-598-6831, or FAX your request to (604) 598-6841. If you have problems or comments concerning our WWW service, please send e-mail to the above address.
Victoria, B.C. local time is
This page last modified
This page, and all contents, are Copyright (C) 1996 by DataSure Services , Victoria, Canada.